We produce Speaker & Interconnect cables developed by ourselves to give very high performance at affordable prices. The key design feature of all our cables is the use of relatively small diameter solid core conductors to enhance the Skin Effect. Put simply AC signals travel along the surface of a wire close to the speed of light. At radio frequencies virtually all the signal travels this way and this is the Skin Effect. However at audio frequencies a proportion of the signal also propagates down the wire itself and this proportion of the signal travels much more slowly. The thicker the wire and or the lower the frequency the more this effect occurs and if you imagine a nice clearly defined music transient setting of down a wire, when it gets to the end of the wire it will be slightly blurred. Some audio people report the Skin Effect as a bad thing but we like it and in listening tests find thin conductors give less sound degradation than thicker ones. A cable also needs adequate current carrying capacity so sometimes multiple conductors are needed to achieve this. However multiple conductors need to be spaced apart otherwise they work like one thick conductor. For this reason amongst others stranded cable is not the way to go in our experience.

Other factors such as materials, geometry, physical and electrical conditioning are all important to the design of a good audio cable. For plugs we go with low mass to complement the small diameter wires. We think Eichmann make the best ones but the benefit of them is some what lost when used with the high mass sockets commonly fitted by equipment manufacturers.

All our cables are supplied with a full refund if you don’t like them and return then in good condition within 28 days.

Speaker Cables:–

The Chevron Speaker Cable provides a very high performance link between amplifiers and speakers. Constructed of polyolefin insulated solid core copper, multiple individually insulated solid core strands are combined to give good current carrying capacity. Normally terminated with low mass 4mm Nickel plated plugs which work better than thick gold plated ones, other termination’s are possible.

The cable is low capacitance to suit most amplifiers.

The cables are run in before supply.

Available in single or biwire configurations, picture above is black but normally we supply grey. 

Price:- 3M pair - £90

      5M pair - £104

      7M pair - £118

   UK Delivery - £8 

Interconnects:-

Pictured above is our best offering The Silver Braid Interconnect. It is made with ptfe insulated solid core Silver wire with 4N purity. 4 strands are woven into a braid with 2 wires paralleled for each conductor. The 2 wires are run from opposite directions of the bulk wire reel so this interconnect is definitely non directional. Wire used is 0.25mm diameter optimizing the skin effect (see explanation in speaker cables above).

The woven braid is annealed to minimize grain boundaries in the silver and the finished cables run in (burnt in) for 3 days (particulary beneficial with silver cable) so you will get good performance soon after connecting they in your system.

Normally supplied with ETi (Eichmann) Silver Bullet Plugs.

The balanced version is similar but made with a 3 wire Braid and Silver Neutrik XLR’s (so its cheaper !).

Price:- Silver IC Unbalanced RCA (Silver Bullet Plugs) - £190 per M pair

      Silver IC Balanced XLR - £160 per M pair.

      For other lengths add or subtract £15 per half meter pair. Max length 2M.

SPC Braid Interconnect pictured above is our entry level interconnect. Its made by weaving 3 ptfe insulated 0.25mm silver plated copper wires. Plugs are stripped down gold plated (not that gold plating does anything for them they just come like that) ptfe insulated, we throw away the thick metal body which degrades the audio signal, leaving a low mass low cost plug.

The woven braid is annealed and the finished cable run in for 24 hrs.

Price:- SPC IC Unbalance RCA - £90 per M pair.

      SPC IC Balanced XLR - £95 per M pair.

      For other lengths add or subtract £10 per half meter pair.

Digital IC - Its similar to the SPC Interconnect.

 Prices:-  75R Unbalanced. - £50 per M.

          110R Balanced - £55 per M.

      For other lengths add or subtract £5 per half meter.

UK Shipping on all interconnects - £5.